Unified approach to terminology in mechanical engineering
https://doi.org/10.31660/2782-232X-2023-1-78-85
Abstract
The purpose of this article is to identify the need for a unified terminology in the organization and to propose a way to implement a unified registry of terms and definitions adopted by the organization.
The paper discusses the main problems associated with the lack of uniform terminology in the organization. An analysis of the accepted terms and definitions, as well as a survey among the employees of the organization carrying out its activities in the field of mechanical engineering, confirmed the need for standardization of terminology. In this regard, the task was to consider ways to implement a single registry of terms used in the preparation of internal regulatory documents. Based on the analysis, recommendations for its development are given.
About the Authors
M. S. Ostapenko
Industrial University of Tyumen
Russian Federation
Russian Federation
Maria S. Ostapenko, Candidate in Engineering, Associate Professor, Associate Professor at the Department
Department of Machines and Tools
Tyumen
M. A. Shatalova
LLC «Gazprom Nedra»
Russian Federation
Russian Federation
Maria A. Shatalova, Leading Engineer
Tyumen
References
1. Dimov, Yu. V. (2012). Metrologiya, standartizatsiya i sertifikatsiya. 4<sup>th</sup> edition. St. Petersburg, Piter Publ., 496 p. (In Russian).
2. Bondar, V. A. (2012). Arkhivnoe delo v Rossiyskoy Federatsii: terminologicheskiy analiz. Arkhivy Rossii i Pol'shi: istoriya, problemy i perspektivy razvitiya: sbornik nauchnykh trudov, Yekaterinburg, May, 05–09, Ural Federal University named after the first President of Russia B. N. Yeltsin, Maria Curie-Sklodowska University in Lublin. Yekaterinburg, Ural Federal University named after the first President of Russia B. N. Yeltsin Publ., pp. 191-225. (In Russian).
3. Novikova, N. A. (2013). Metrologiya, standartizatsiya i sertifikatsiya. Ekaterinburg, Ural State Mining University Publ., 27 p. (In Russian).
4. Lifits, I. M. (2005). Standartizatsiya, metrologiya i sertifikatsiya. 5<sup>th</sup> edition, revised. Moscow, Yurayt-Izdat Publ., 351 p. (In Russian).
5. Akmaykin, D. A. (2008). Metrologiya, standartizatsiya i sertifikatsiya. Vladivostok, The Admiral Nevelskoy Maritime State University Publ., 150 p. (In Russian).
6. Rebrushkina, I. A. (2004). Ob odnom tipe izomorfizma znacheniy i struktur v mikrosistemakh lingvistiki: k voprosu ob orientiruyushchikh svoystvakh termina. Funktsional'no-semanticheskie issledovaniya. Saransk, Krasnyy Oktyabr' Publ., (3), pp. 92-95. (In Russian).
7. Vinogradov, S. I., Danilenko, V. P., Karpinskaya, E. V., Kozlovskaya, T. L., Kokhtev, N. N., Lazutkina,..., Shvartskopf, B. S. (1999). Kul'tura russkoy rechi. Moscow, NORMA-INFRA Publ., 560 p. (In Russian).
8. Popov, Yu. I., & Yakovenko, O. V. (2008). Upravlenie proektami. Moscow, INFRA-M Publ., 207 p. (In Russian).
9. Shvetsova-Vodka, T. N. (2001). Klassifikatsiya komp'yuternykh bibliograficheskikh resursov. Tomsk, Mir bibliografii Publ., 21 p. (In Russian).
10. Gerasimova, E. B., & Gerasimov, B. I. (2018). Metrologiya, standartizatsiya i sertifikatsiya. 2<sup>nd</sup> edition. Moscow, FORUM, INFRA-M Publ., 223 p. (In Russian).
Review
For citations:
Ostapenko M.S., Shatalova M.A. Unified approach to terminology in mechanical engineering. Architecture, Construction, Transport. 2023;(1):78-85. (In Russ.) https://doi.org/10.31660/2782-232X-2023-1-78-85
Views:
46
Email this article 