Modeling and accounting of strengthening zones of thin-walled steel profiles in ANSYS
https://doi.org/10.31660/2782-232X-2021-4-44-51
Abstract
The article describes the process and reflects the results of modeling a steel thin-walled sigma profile operating under axial compression in the ANSYS software. Modeling is carried out taking into account the zones of hardening of steel along the profile section. The results are analyzed and compared with the results obtained in STARK.
About the Authors
N. D. Korsun
Industrial University of Tyumen
Russian Federation
Russian Federation
Natalya D. Korsun, Candidate of Engineering, Professor at the Department of Building Constructions
Tyumen
D. A. Prostakishina
Industrial University of Tyumen
Russian Federation
Russian Federation
Darya A. Prostakishina, Assistant at the Department of Building Structures
Tyumen
References
1. Yurchenko, V. V. (2010). Proektirovanie karkasov zdaniy iz tonkostennykh kholodnognutykh profiley v srede «SCAD Office». Magazine of Civil Engineering, 8 (18), pp. 38-46. (In Russian).
2. Ilyukhina, E. A., & Sobolev, A. A. (2018). Mirovaya praktika primeneniya tekhnologii LSTK v stroitel'stve. Polzunovskiy al'manakh, (1), pp. 89-92. (In Russian).
3. Rybakov, V. A. (2012). Primenenie polusdvigovoy teorii V.I. Slivkera dlya analiza napryazhennodeformirovannogo sostoyaniya sistem tonkostennykh sterzhney. Avtoref. diss. … kand. tekhn. nauk. Saint-Petersburg, 21 p. (In Russian).
4. Lyubavskaya, I. V., & Sotnikova, M. V. (2017). Manufacturability of manufacturing of light gauge steel framing manufacturability. Tendentsii razvitiya sovremennoy nauki: Sbornik tezisov dokladov nauchnoy konferentsii studentov i aspirantov Lipetskogo gosudarstvennogo tekhnicheskogo universiteta: v 2-kh chastyakh, April, 24–26, 2017. Lipetsk, Lipetsk State Technical University Publ., pp. 414-416. (In Russian).
5. Arktikov, G. A., Belyaev, V. F., & Gladshteyn, L. I. (1994). Vliyanie kholodnoy formovki na mekhanicheskit svoystva stali zamknutykh gnutosvarnykh profiley kholodnoy formovki. Industrial and Civil Engineering, (5), pp. 16-24. (In Russian).
6. Astakhov, I. V., & Belyy, G. I. (2006). Prostranstvennaya ustoychivost' elementov konstruktsiy iz kholodnognutykh profiley. Montazhnye i spetsial'nye raboty v stroitel'stve, (9), pp. 21-25. (In Russian).
7. Landesmann, A., Moreira da Silva, F. C. M., & Batista, E. M. (2014). Experimental Investigation of the Mechanical Properties of ZAR-345 Cold-Formed Steel at Elevated Temperatures. Materials ResearchIbero-American Journal of Materials, 17(4), pp. 1082-1092. (In English). DOI: 10.1590/1516-1439.297014
8. Ranawaka, T., & Mahendran, M. (2009). Experimental study of the mechanical properties of light gauge cold-formed steels at elevated temperatures. Fire Safety Journal, 44(2), pp. 219-229. (In English). DOI: 10.1016/j.firesaf.2008.06.006
9. Lee, J., Mahendran, M., & Makelainen, P. (2003). Prediction of mechanical properties of light gauge steels at elevated temperatures. Journal of Constructional Steel Research, 59(12), pp. 1517-1532. (In English). DOI: 10.1016/S0143-974X(03)00087-7
10. Korsun, N. D., & Prostakishina, D. A. (2020). Adaptation of the methodology and analysis of laboratory testing of the strength of cold-formed thin-walled steel. The Eurasian Scientific Journal, 6(12). (In Russian). Available at: https://esj.today/PDF/63SAVN620.pdf (date of application 10.11.2021).
11. Korsun, N. D., & Prostakishina, D. A. (2021). Analysis of the operation of thin-walled profiles taking into account the strengthening of steel. Nauchnye issledovaniya XXI veka, 3(11), pp. 48-52. (In Russian). Available at: https://esj.today/PDF/63SAVN620.pdf (date of application 10.11.2021).
12. Korsun, N. D., & Prostakishina, D. A. (2018). Structural analysis of stress and strain state of paired thinwalled section with initial geometric imperfections. Akademicheskij Vestnik Uralniiproekt RAASN, 4(39), pp. 83-89. (In Russian).
Review
For citations:
Korsun N.D., Prostakishina D.A. Modeling and accounting of strengthening zones of thin-walled steel profiles in ANSYS. Architecture, Construction, Transport. 2021;(4):44-51. (In Russ.) https://doi.org/10.31660/2782-232X-2021-4-44-51
Views:
17
Email this article 