Building 3D printers and their advantages in low-rise construction
https://doi.org/10.31660/2782-232X-2023-2-16-25
Abstract
The search for new opportunities in construction to achieve effective results, reduce labor intensity and shorten the time of construction of buildings is very relevant today. This article discusses the term of a construction printer, its operating principle. Examples of completed objects are given. Types of construction printers depending on the drive layout are defined. The materials used for extrusion and the basic composition of the concrete mixture for printing are described. The authors offer a comparison of three most common models of building 3D printers (Russian and foreign) for low-rise construction. Then they describe the model range of printers produced by Russia's leading plant "SPETSAVIA" and their types. The paper highlights the vectors of development in the field of construction printing. It has been justified the necessity of using a building printer in low-rise construction, named the advantages and disadvantages of this method of erecting buildings.
About the Authors
E. V. Svintsov
Perm National Research Polytechnic University
Russian Federation
Russian Federation
Evgeniy V. Svintsov, Student at the Department of Civil Engineering
O. V. Petreneva
Perm National Research Polytechnic University
Russian Federation
Russian Federation
Olga V. Petreneva, Senior Lecturer at the Department of Building Production and Geotechnics
References
1. Kozlov, S. D., Koridze, V. G., Bondar, A. V., & Tchaikovsky, A. O. (2017). Application of a 3D printer for lowrise construction. Advantages and disadvantages. Bulletin of science and practice, (5(18)), pp. 102-105. (In Russian). DOI 10.5281/zenodo.579732
2. Bondarev, B. A., Bayazov, V. A., Korneev, O. O., Vostrikov, I. A., Meshcheryakov, A. A., & Korneeva, A. O. (2021). Selection of mixtures for 3D printing. The Eurasian Scientific Journal, 3(13). Available at: https://esj.today/PDF/29SAVN321.pdf. (In Russian). DOI 10.15862/29SAVN321.
3. Shorstova, E. S., Klyuev, S. V., & Klyuev, A. V. (2019). Iber concrete for 3D-printing. Bulletin of BSTU named after V. G. Shukhov, (3), pp. 22-27. (In Russian). DOI 10.34031/article_5ca1f6300a4956.62644399.
4. Mukhametrakhimov, R. Kh., & Ziganshina, L. V. Modified concrete mixture for 3D printer extrusion. Patent na izobretenie 2780512 C1 SU, MPK C04B 28/04. № 2021140041. Applied: 30.12.2021. Published: 26.09.2022. (In Russian).
5. Mukhametrakhimov, R. Kh., & Ziganshina, L. V. Сoncrete mixture for extrusion on a 3D printer. Patent na izobretenie 2777220 C1 SU, MPK C04B 28/04. № 2021140039. Applied: 30.12.2021. Published: 01.08.2022. (In Russian).
6. Luneva, D. A., Kozhevnikova, E. O., & Kaloshina, S. V. (2017). Application of 3D printing in construction activities and its prospects. Vestnik Permskogo natsional'nogo issledovatel'skogo politekhnicheskogo universiteta. Stroitel'stvo i arkhitektura, 8(1), pp. 90-101. (In Russian). DOI 10.15593/2224-9826/2017.1.08.
7. Drebezgova, M. Yu. (2017). Sovremennye additivnye tekhnologii v maloetazhnom stroitel'stve. Bulletin of BSTU named after V. G. Shukhov, (6), pp. 66-69. (In Russian). DOI 10.12737/article_5926a0597879f0.60859363.
8. Legezina, A. S., & Pashkova, L. A. (2018). 3D-printer v stroitel'stve sovremennogo zhil'ya. Vestnik nauki i tvorchestva, (11(35)), pp. 17-19. (In Russian).
9. Yusuphodjaev, S. A., Nigmatjonov, D., & Funtikova, R. Yu. (2022). Benefits of using 3D printers in lowstory construction in Uzbekistan. Available at: https://7universum.com/ru/tech/archive/item/13099 (accessed 29.03.2023). (In Russian). DOI 10.32743/UniTech.2022.95.2.13099.
10. Leonova, A. N., Meged’, T. K., & Sogonova, M. Yu. (2018). Innovatsionnoe stroitel'stvo zdaniy i sooruzheniy s pomoshch'yu 3D-printera. Stroitel'stvo: novye tekhnologii - novoe oborudovanie, (9), pp. 67-70. (In Russian).
11. Kashiripoor, M. M., & Garagozov, S. B. (2022). New trends and innovations in construction: building with a 3D printer. Inzhiniring i ekonomika: sovremennoe sostoyanie i perspektivy razvitiya : Sbornik materialov studencheskoy nauchno-tekhnicheskoy konferentsii v ramkakh 20-y mezhdunarodnoy nauchno-tekhnicheskoy konferentsii BNTU "Nauka - obrazovaniyu, proizvodstvu i ekonomike" i 78-y studencheskoy nauchno-tekhnicheskoy konferentsii BNTU, May, 04-05. Minsk, Belarusian National Technical University Publ., pp. 94-99. (In Russian).
Review
For citations:
Svintsov E.V., Petreneva O.V. Building 3D printers and their advantages in low-rise construction. Architecture, Construction, Transport. 2023;(2):16-25. (In Russ.) https://doi.org/10.31660/2782-232X-2023-2-16-25
Views:
18
Email this article 