Thermal deformations of the building covering made from the aluminum alloy operated outdoors
https://doi.org/10.31660/2782-232X-2023-4-6-16
Abstract
The purpose of the numerical and analytical studies was to analyze the annual temperature deformations of the long-span coating of the Sports Arena building in Tyumen. The structure of covering is made of 1915 grade aluminum alloy and is operated outdoors. Annual differences in outdoor air temperatures led to significant temperature deformations of the building covering in the transverse direction. Comparison of the obtained calculated values of thermal deformations of the roof trusses with the normative limit values made it possible to conclude that the bearing structure of the covering is poor from the point of view of perception of climatic influences. The use of classic approaches to the design of building coverings inside the thermal circuit makes it possible to significantly reduce the risks of defects and damage to structures during their long-term operation.
About the Authors
A. P. Malyshkin
Industrial University of Tyumen
Russian Federation
Russian Federation
Aleksandr P. Malyshkin, Cand. Sc. in Engineering, Associate Professor, Associate Professor at the Department of Building Structures
A. V. Esipov
Industrial University of Tyumen
Russian Federation
Russian Federation
Andrei V. Esipov, Cand. Sc. in Engineering, Associate Professor at the Department of Building Structures
A. I. Baranyak
LLC "RPC "Sibstroy Engineering"
Russian Federation
Russian Federation
Andrej I. Baranyak, Chief Project Engineer
M. A. Esipov
Industrial University of Tyumen
Russian Federation
Russian Federation
Mixail A. Esipov, Bachelor
References
1. Mikhaylov, G. G. (2007). Bol'sheproletnye alyuminievye konstruktsii dlya sportivno-zrelishchnykh sooruzheniy i kompleksov. Stroyprofil', (5). (In Russian). Available at: https://stroyprofile.com/archive/2701 (accessed 12. 07.2023).
2. Mikhaylov, G. G. (2007). Bol'sheproletnye alyuminievye konstruktsii: istoriya i sovremennost'. Stroyprofil', (4). (In Russian). Available at: https://stroyprofile.com/archive/2655 (accessed 12. 07.2023).
3. Zykov, S. A., Pavlova, V. I., & Osokin, E. P. (2014). Sravnitel'nyy analiz svoystv svarnykh soedineniy alyuminievomagnievykh splavov, vypolnennykh neplavyashchimsya i plavyashchimsya elektrodom. Novosti materialovedeniya. Nauka i tekhnika, (5), P. 2. (In Russian).
4. Konyukhov, A. D., Drits, A. M., & Shutrakov, A. K. (2013). Properties of aluminium alloy butt weld connections. Russian Railway Science Journal, (3), pp. 33-38. (In Russian).
5. Kunin, Yu. S., & Sineev, A. A. (2022). Calculation and design of friction joints of aluminum structures. Problems and Solutions. Construction production, (2), pp. 72-76. (In Russian).
6. Kunin, Ju. S., & Sineev, A. A. (2020). Load-bearing capacity of friction joints of aluminum structures. Industrial and Civil Engineering, (12), pp. 82-85. (In Russian).
7. Yelagin, V. I., Zakharov, V. V., Rostova, T. D., Shvechkov, Ye. I., Fisenko, I. A., & Kirillova, L. P. (2014). A high-strength low-density aluminium alloy for the aircraft industry. Technology of Light Alloys, (4), pp. 23-31. (In Russian).
8. Yelagin, V. I., Ber, L. B., Rostova, T. D., Shvechkov, Ye. I., & Ukolova, O. G. (2013). Secondary ageing with reference to high-strength aluminium alloys. Technology of Light Alloys, (2), pp. 20-28. (In Russian).
9. Yelagin, V. I., Zakharov, V. V. Rostova, T. D., Shvechkov, Ye. I., Fisenko, I. A., & Kirillova, L. P. (2011). Development of structural strengthening ideas in conformity with aluminium alloy skin sheets. Technology of Light Alloys, (3), рр. 18-24. (In Russian).
10. Dobatkin, S. V., Zakharov, V. V., Estrin, Yu. Rostova, T. D., Ukolova, O. G., & Chirkova, A. V. (2009). An improvement in strength and ductility of Al-Mg-Mn alloys alloyed with Zr and Sc obtained due to equal channel angular pressing. Technology of Light Alloys, (3), pp. 46-59. (In Russian).
11. Shvechkov, Ye. I. (2015). Mechanical and crack resistance anisotropy of aluminium alloy sheets. Technology of Light Alloys, (3), pp. 72-84. (In Russian).
12. Shvechkov, Ye. I., Syrov, A. V., Lebedev, G. D., Rostova, T. D., Azanova, Ye. V., & Borovkov, O. V. (2013). Mechanical properties and crack resistance characteristics of large-size 1163T alloy shapes. Technology of Light Alloys, (3), рр. 51-58. (In Russian).
13. Korgin, A. V. (2022). The analysis of fatigue resistance of bridge structures made of aluminum alloys. Construction: Science and Education, 12(2), рр. 31-49. (In Russian). DOI 10.22227/2305-5502.2022.2.3.
14. Korgin, A. V., Ermakov, V. A., & Zeyd Kilani, L. Z. (2022). Getting orthotropic deck plates involved in the structural performance of the bearing structures of bridges made of aluminum alloys. Vestnik MGSU [Monthly Journal on Construction and Architecture], 17(7), рр. 882–896. (In Russian). DOI 10.22227/1997-0935.2022.7.882-896.
15. Lobanov, D. S., Tret'yakov, M. P., Vil'deman, V. E., Tret'yakova, T. V., & Karmanov, V. V. (2021). Deformirovaniya i razrushenie elementov konstruktsiy iz alyuminievogo splava, obladayushchikh strukturnoy neodnorodnost'yu. Aerokosmicheskaya tekhnika, vysokie tekhnologii i innovatsii, 2, pp. 107-110. (In Russian).
16. Ischuk, Y. P., Pogodina, P. V., & Leonova, A. N. (2020). Advantages and disadvantages of building structures made of aluminum alloys. Scientific Works of the Kuban State Technological University, (8), pp. 237-244. (In Russian).
17. Yagnyuk, B. (2019). Aluminium alloys characteristics used for building structures in european standards. Resources and Technology, 16(1), pp. 68-79. (In Russian). DOI 10.15393/j2.art.2019.4462.
18. Bisha, A., & Londo, A. (2012). Aluminium and glass construction. Energetic Planning. Mechanics. Researches and Innovations, (6), рр. 12-18. (In Russian).
19. Vedyakov, I. I., Odessky, P. D., & Gukova, M. I. (2013). Aluminium alloys for building metal structures (commentaries on SP 128.13330). Industrial and Civil Engineering, (10), pp. 5-8. (In Russian).
Review
For citations:
Malyshkin A.P., Esipov A.V., Baranyak A.I., Esipov M.A. Thermal deformations of the building covering made from the aluminum alloy operated outdoors. Architecture, Construction, Transport. 2023;(4):6-16. (In Russ.) https://doi.org/10.31660/2782-232X-2023-4-6-16
Views:
22
Email this article 