High performance concrete with complex additives and local raw materials
Abstract
This article presents the features of modern concrete, shows the development prospects. Experimental data of concrete production with a strength of up to 70 MPa are presented, characterized in that along with chemical additives local aleuropelite rocks of the Ishim suite in the south of the Tyumen region are used. The physical and mechanical properties of cement and concrete are analyzed in the article and conclude that the complex of modifying components allows without increasing the cement consumption to increase the mechanical characteristics of concrete by 30-40 %.
About the Authors
G. A. Zimakova
Industrial University of Tyumen
Russian Federation
Russian Federation
Galina A. Zimakova, Candidate of Engineering, Аssociate Professor, Head at the Department of Building Materials
Tyumen
V. A. Solonina
Industrial University of Tyumen
Russian Federation
Russian Federation
Valentina A. Solonina, Candidate of Engineering, Аssociate Professor at the Department of Building Materials
Tyumen
M. P. Zelig
Industrial University of Tyumen
Russian Federation
Russian Federation
Marina P. Zelig, Senior Lecturer at the Department of Building Materials
Tyumen
References
1. Qing, Y., Zenan, Z., Deyu, K., & Rongshen, C. (2007). Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume. Construct Build Mater, 21(3), pp. 539-545. (In English). DOI: 10.1016/J.CONBUILDMAT.2005.09.001
2. Bazhenov, Yu. M., Chernishov, E. M., & Korotkikh, D. N. (2014). Structure design of modern concrete: key principles and technological basis. Stroitel’nye Materialy (Construction Materials), (3), pp. 6-14. (In Russian).
3. Qing, Y., Zenan, Z., Li, S., & Rongshen, C. (2006). A comparative study on the pozzolanic activity between nano-SiO2 and silica fume. Wuhan Univ Technol – Mater Sci Ed, 21(3), pp. 153-157. (In English). Available at: https://doi.org/10.1007/BF02840907
4. Li, Z. Wang, H., He, S., Lu, Y., & Wang, M. (2006). Investigations on the preparation and mechanical properties of the nano-alumina reinforced cement composite. Mater Lett, 60(3), pp. 356-359. (In English). DOI: 10.1016/j.matlet.2005.08.061
5. Scrivener, K. L. & Kirkpatrick, R. J. (2008). Innovation in use and research on cementitious material. Cem Concr Res, 38(2), pp. 128-136. (In English). Available at: https://doi.org/10.1016/j.cemconres.2007.09.025
6. Kalashnikov, V .A. (2016). Evolution of development of concretes compositions and change in concrete strength. concretes of present and future. Part 1. Change in compositions and strength of concretes. Stroitel’nye Materialy (Construction Materials), (1-2), pp. 96-103. (In Russian).
7. Koktsinskaya, E. M. (2016). Smart materials and its application. Videonauka,1(1), pp. 3-19. (In Russian).
8. Goffredo, G. B, Quagliarini, E., Bondioli, F., & Munafo, P. (2014). TiO2 nanocoatings for architectural heritage: Self-cleaning treatments on historical stone surfaces. Journal of Nanoengineering and Nanosystems, 228 (1), pp. 2-10. (In English). Available at: https://doi.org/10.1177/1740349913506421
9. Sanchez, F., & Sobolev, K. (2013). Nanotekhnologii v proizvodstve betonov. Obzor. Vestnik of Tomsk state university of architecture and building, (3), pp. 262-281. (In Russian).
10. Yaglov, V. N., Burak, G. A., & Mezgentsev, A. A. (2012). Nanoparticles in a concrete. Stroitel’’naya nauka i tekhnika, (1), pp. 21-30. (In Russian).
11. Sobolev, K. (2016). Modern developments in nanotechnology and nanoengineering of cement and concrete. Cement and its application, (4), pp. 96-100. (In Russian).
12. Kirsanova, A. A., Kramar, L. Ya., & Ruzavin, A. A. (2017). High-functional heavy concrete normal solids. Architecture, urbanism & design, (15), pp. 32-38. (In Russian).
13. Kalashnikov, V. I., Suzdaltsev, O. V., Dryanin, R. A., & Sekhposyan, G. P. (2014). The role of dispersed and fine-grained filler in concrete of new generation. News of higher educational institutions. Construction, (7), pp. 11-21. (In Russian).
14. Kaprielov, S. S. (1995). Obshchie zakonomernosti formirovaniya struktury tsementnogo kamnya i betona s dobavkoy ul’tradispersnykh materialov. Beton i zhelezobeton, (4), pp. 16-20. (In Russian).
15. Zimakova, G. A., Kasper, E. A., & Bochkareva, O. S. (2019). Strengthening of concrete composites using polycarboxylate and aluminosilicate materials. Advances in Intelligent Systems and Computing, (1116), pp. 316-328. (In English). Available at: https://doi.org/10.1007/978-3-030-37919-3_31
16. Tolstoi, A. D., Lesovik, V. S., & Novikov, K. Iu. (2016). High endurance concretes on composite bindings with the use of man-made raw materials. Izvestiya vuzov. Investitsii. Stroitelstvo. Nedvizhimost, (2), pp. 174-180. (In Russian).
Review
For citations:
Zimakova G.A., Solonina V.A., Zelig M.P. High performance concrete with complex additives and local raw materials. Architecture, Construction, Transport. 2021;(1):38-46. (In Russ.)
Views:
25
Email this article 