Improving of operating properties of the gas distributing mechanism of internal combustion engine
https://doi.org/10.31660/2782-232X-2021-4-83-89
Abstract
Reducing the heat load of the valve mechanism of the gas distribution system is an urgent task. This is due to the need to reduce the risks of deformation of the working surface of the valve disc and, as a consequence, to increase the resource of the gas distribution mechanism.
The paper proposes a valve mechanism design with the possibility of supplying the coolant to the combustion chamber through the valve cavity. The data from the preliminary study showed the effectiveness of the coolant supply. When comparing the temperature indicators in the test points under study, a decrease in the valve temperature by 0,72– 25 % was revealed.
About the Author
A. S. Lorents
Northern (Arctic) Federal University named after M. V. Lomonosov
Russian Federation
Russian Federation
Anatoly S. Lorents, Candidate of Engineering, Associate Professor at the Department of Engineering of Transport and Technological Means and Equipment
Arkhangelsk
References
1. Kurasov, V. S., Dragulenko, V. V., & Sidorenko, S. M. (2013). Teoriya dvigateley vnutrennego sgoraniya. Krasnodar, Kuban State Agrarian University Publ., 86 p. (In Russian).
2. Huang, X., & Xie, Y. M. (2010). Evolutionary Topology Optimization of Continuum Structures: Methods and Applications. Hoboken, John Wiley & Sons, 237 p. (In English).
3. Efimov, S. I., Ivashchenko, N. A., Ivin, V. I., Alekseev, V. P., Vyrubov, D. N., Grekhov, L. V., … Chistyakov, V. K. (1985). Dvigateli vnutrennego sgoraniya: Sistemy porshnevykh i kombinirovannykh dvigateley. 3rd edition, revised. Moscow, Mashinostroenie Publ., 456 p. (In Russian).
4. Vikhert, M. M., Dobrogaev, R. P., Lyakhov, M. I., Pavlov, A. V., Solov'ev, M. P., Stepanov, Yu. A., & Suvorov, V. G. (1964). Konstruktsiya i raschet avtotraktornykh dvigateley. 2nd edition, revised. Moscow, Mashinostroenie Publ., 552 p. (In Russian).
5. Sharoglazov, B. A., Farafontov, M. F., & Klement'ev, V. V. (2005). Dvigateli vnutrennego sgoraniya: teoriya, modelirovanie i raschet protsessov. Chelyabinsk, South Ural State University Publ., 403 p. (In Russian).
6. Piddubniy, I., & Cherneta, O. (2012). Аnalysis of steels are applied for production of engines''s valves of automobiles. Visnik SevNTU, (134), pp. 158-161. (In Russian).
7. Motovilin, G. V., Masino, M. A., & Suvorov, O. M. (1989). Avtomobil'nye materialy. 3rd edition, revised. Moscow, Transport Publ., 463 p. (In Russian).
8. Bespyatyy, F. S., & Troitskiy, I. F. (1972). Konstruktsiya, osnovy teorii i raschet traktora. 2nd edition, revised. Moscow, Mashinostroenie Publ., 502 p. (In Russian).
9. Lukanin, V. N., Alekseev, I. V., Shatrov, M. G., Pavlov, A. V., Gorshkov, Yu. V., Nazarov, N. I., … Sinyavskiy,V. V. (2007). Dvigateli vnutrennego sgoraniya. V 3 kn. Kn. 2. Dinamika i konstruirovanie. 3rd edition, revised. Moscow, Vysshaya shkola Publ., 400 p. (In Russian).
10. Svanberg, K., & Werme, M. (2006). Topology Optimization by Sequential Integer Linear Programming. IUTAM Symposium on Topological Design Optimization of Structures, Machines and Materials, (137), pp. 425-436. (In English). DOI: 10.1007/1-4020-4752-5_42
11. Lorents, A. S. Ustroystvo dlya termokompensatsii klapannogo mekhanizma sistemy gazoraspredeleniya s polozhitel'nym vozdeystviem na kharakteristiki DVS. Patent na izobretenie 2740832 RF, MPK F02M25/03, F01L3/18. No 2020110315. Applied: 12.03.2020. Published: 21.01.2021. (In Russian).
Review
For citations:
Lorents A.S. Improving of operating properties of the gas distributing mechanism of internal combustion engine. Architecture, Construction, Transport. 2021;(4):83-89. (In Russ.) https://doi.org/10.31660/2782-232X-2021-4-83-89
Views:
19
Email this article 