Solving the issue of ensuring the alignment of two intersecting metal wires using a test bench for a metal spraying as an example
https://doi.org/10.31660/2782-232X-2023-2-80-87
Abstract
In this work, the task was to ensure the alignment of two intersecting metal wires to maintain the welding arc at all times. This need arose as a result of an experiment in cold spray metal plating. It revealed a problem that does not allow maintaining a constant spraying process: the welding arc was unstable, because it did not ensure constant contact of differently charged metal wires. A description of the equipment used in the experiment (including both a real prototype and a three-dimensional model) and modifications of the existing mechanism to solve the identified problem is given. Also presented a general view of the modified design, as well as a separated three dimensional model to show the fundamental design changes. As a result, a modified model of the housing, where the welding nozzles are located, has been developed. It is capable to ensure the adjustment of the welding nozzle position and, accordingly, to guarantee constant alignment of the two intersecting metal wires.
About the Authors
D. E. Pisarev
Industrial University of Tyumen
Russian Federation
Russian Federation
Dmitry E. Pisarev, Laboratory Assistant at the Department of Mechanical Engineering Technology
S. I. Mitrokhin
Industrial University of Tyumen
Russian Federation
Russian Federation
Sergey I. Mitrokhin, Student of the Department of Mechanical Engineering Technology
A. I. Starikov
Industrial University of Tyumen
Russian Federation
Russian Federation
Alexander I. Starikov, Senior Lecturer at the Department of Mechanical Engineering Technology
References
1. Lobanov, M. L., Kardonina, N. I., Rossina, N. G., & Yurovskikh, A. S. (2014). Zashchitnye pokrytiya. Ekaterinburg, Ural Federal University Publ., 200 p. (In Russian).
2. Gamburg, Yu. D. (2006). Gal'vanicheskie pokrytiya. Spravochnik po primeneniyu. Moscow, Tekhnosfera Publ., 216 p. (In Russian).
3. Lakhtin, Yu. M., & Arzamasov, B. N. (1985). Khimiko-termicheskaya obrabotka metallov. Moscow, Metallurgiya Publ., 256 p. (In Russian).
4. Popov, A. A. (1962). Teoreticheskie osnovy khimiko-termicheskoy obrabotki stali. Moscow, Metallurgizdat Publ., 120 p. (In Russian).
5. Borisenok, G. V., Vasil'ev, L. A., Voroshnin, L. G., Gorbunov, N. S., Dubinin, G. N., Zhunkovskiy, G. L., ... Shcherbakov, E. D. (1981). Khimiko-termicheskaya obrabotka metallov i splavov: spravochnik. Moscow, Metallurgiya Publ., 424 p. (In Russian).
6. Shatinskiy, V. F., & Nesterenko, A. I. (1988). Zashchitnye diffuzionnye pokrytiya. Kiev, Naukova dumka Publ., 267 p. (In Russian).
7. Kharlamov, Yu. A. (2000). Gazotermicheskoe napylenie pokrytiy i ekologichnost' proizvodstva, ekspluatatsii i remonta mashin. Tyazheloe mashinostroenie, (2), pp. 10-13. (In Russian).
8. Pisarev, D. E. (2022). Matematicheskoe modelirovanie geometricheskikh parametrov sopla Lavalya. Tekhnologicheskoe oborudovanie dlya gornoy i neftegazovoy promyshlennosti: sbornik trudov XX mezhdunarodnoy nauchno-tekhnicheskoy konferentsii "Chteniya pamyati V. R. Kubacheka", April, 07-08, Ekaterinburg, Ural State Mining University Publ., pp. 212-216. (In Russian).
9. Novikova, A. A., & Pisarev, D. E. (2022). Izuchenie geometricheskikh parametrov sopla Lavalya, vliyayushchikh na skorost' vozdushnogo potoka. Nauka i obrazovanie: aktual'nye issledovaniya i razrabotki: Materialy V Vserossiyskoy nauchno-prakticheskoy konferentsii, September, 15-16. Chita, Transbaikal State University Publ., (2), pp. 80–84. (In Russian).
10. Pisarev, D. E., & Mitrokhin, S. I. (2023). Ispol'zovanie spetsial'nykh otverstiy v sople Lavalya dlya izmeneniya skorosti vozdushnogo potoka. Materialy Mezhdunarodnoy nauchno-prakticheskoy konferentsii im. D. I. Mendeleeva, November, 24-26. Tyumen, Industrial University of Tyumen Publ., (2), pp. 255-258. (In Russian)
Review
For citations:
Pisarev D.E., Mitrokhin S.I., Starikov A.I. Solving the issue of ensuring the alignment of two intersecting metal wires using a test bench for a metal spraying as an example. Architecture, Construction, Transport. 2023;(2):80-87. (In Russ.) https://doi.org/10.31660/2782-232X-2023-2-80-87
Views:
12
Email this article 