Study of the operation of a wooden beam reinforced with steel plates
https://doi.org/10.31660/2782-232X-2023-2-46-53
Abstract
The article describes the main problems of engineering reinforced wooden structures associated with the justification of their reliability. Tasks to study the operation of a wooden reinforced beam taking into account the nonlinear operation of wood have been set and solved. A girder structure reinforced in the compressed and tensile zones by plate elements was used as the object of the research. To achieve the aims, the authors carried out an experimental study using strain-gauge equipment, numerical simulation of the structure in the ANSYS PC and analytical calculations. Based on the results, conclusions about the effectiveness of steel plate reinforcement in wooden beams have been made. The results can be applied in the engineering, and the developed structure can be used as the elements of the frame structures and as floor beams.
About the Authors
V. F. Baj
Industrial University of Tyumen
Russian Federation
Russian Federation
Vladimir F. Baj, Candidate in Engineering, Associate Professor, Head at the Department of Building Structures
S. A. Erenchinov
Industrial University of Tyumen
Russian Federation
Russian Federation
Sergey A. Erenchinov, Candidate in Engineering, Associate Professor at the Department of Building Structures
E. A. Gach
Industrial University of Tyumen
Russian Federation
Russian Federation
Evgeniy A. Gach, Student at the Department of Building Structures
References
1. Arleninov, D. K., Buslaev, Yu. N., Ignat'ev, V. P., Romanov, P. G., & Chakhov, D. K. (2002). Konstruktsii iz dereva i plastmass. Moscow, ASV Publ., 280 p. (In Russian).
2. Roshchina, S. I. (2008). Reinforcement – efficient means of increasing reliability and durability of wooden structures. Russian forestry journal, (2), pp. 71-74. (In Russian).
3. Roshchina, S. I., Sergeev, M. S., & Lukina, A. V. (2013). Reinforced wooden structures. Russian forestry journal, (4(334)), pp. 80-85. (In Russian).
4. Yarmonchik, A. S., & Lobanov, Yu. A. (2005). Metalloderevyannye konstruktsii, vozmozhnosti ispol'zovaniya. XXXIII Nedelya nauki SPbGPU. Materialy mezhvuzovskoy nauchno-tekhnicheskoy konferentsii. Peter the Great St. Saint-Petersburg, Petersburg Polytechnic University Publ., 1, pp. 77-78. (In Russian).
5. Esipov, A. V., & Lykova, Y. V. (2016). Engineering method of calculation of increase of bearing capacity of solid wood beams by mounting reinforcement bar in the tension zone. Akademicheskij vestnik URALNIIPROEKT RAASN, (4(31)), pp. 61-65. (In Russian).
6. Arleninov, D. K., & Bekker, D. A. (2015). Effects of stress level on wood creep under bending. Russian forestry journal, (6(348)), pp. 128-137. (In Russian).
7. Esipov, А. V., Vorobev, Ya. V., Baranyak, А. I., & Salnyj, I. S. (2018). The results of comprehensive studies of wooden reinforcement beams. Akademicheskij vestnik URALNIIPROEKT RAASN, (2(37)), pp. 80-86. (In Russian).
8. Aroyan, A. V. (2020). Otsenka effektivnosti listovogo armirovaniya nesushchikh balochnykh konstruktsiy s uchetom effekta polzuchesti drevesiny. Prioritetnye napravleniya innovatsionnoy deyatel'nosti v promyshlennosti: Sbornik nauchnykh statey po itogam shestoy mezhdunarodnoy nauchnoy konferentsii, June, 29-30. Kazan', OOO "Konvert" Publ., 1, pp. 20–26.
9. Esipov, A. V., Lykova, Y. V., & Erenchinov, S. A. (2017). Experimental researches strengthening solid wood beams of reinforcement bar in the tension zone. Akademicheskij vestnik URALNIIPROEKT RAASN, (1(32)), pp. 83-89. (In Russian).
10. Shchuko, V. Yu., & Roshchina, S. I. (2007). Kleenye armirovannye derevyannye konstruktsii: uchebnoe posobie. Vladimir, Vladimir State University, 63 p. (In Russian).
Review
For citations:
Baj V.F., Erenchinov S.A., Gach E.A. Study of the operation of a wooden beam reinforced with steel plates. Architecture, Construction, Transport. 2023;(2):46-53. (In Russ.) https://doi.org/10.31660/2782-232X-2023-2-46-53
Views:
28
Email this article 